Automatic submersible clean water pump 1100 W 6500 l/h

The automatic submersible pump is designed for extracting clean water from wells, shafts and tanks, and for supplying irrigation systems. Power 1100 W, maximum flow rate 6500 l/h and a maximum head of up to 45 m make the unit suitable for garden irrigation, rainwater transfer and supplying water to delivery points.

The pump operates in automatic mode. When water is drawn and the pressure falls below approximately 1.5 bar, the unit starts automatically. After closing the delivery point the pump switches off, reducing the need for manual control. An integrated non-return valve maintains pressure in the delivery pipe, preparing the installation for the next start.

The unit can be submerged to a depth of up to 12 m. The power cable of approximately 15 m and the supplied rope of approximately 20 m facilitate installation in a deeper well or tank. The set includes two connectors: a stepped hose tail 1" and 3/4" and an adapter compatible with standard garden quick-connect fittings.

Main product advantages

• Automatic start and stop – the pump responds to water draw without the need for manual operation each time.

• Flow rate up to 6500 l/h – enables efficient pumping from wells and tanks.

• Maximum head up to 45 m – allows supplying water to higher points of the installation.

• Integrated non-return valve – prevents the delivery pipe from emptying after the pump stops.

• Low-flow protection – the controller switches the unit off when conditions indicating a possible leakage on the delivery side are detected.

• Power cable 15 m and rope 20 m – facilitate installation of the unit in a well, shaft or tank.

• Two types of connectors – allow connection of a traditional hose and installations equipped with garden quick-connect fittings.

• Protection rating IPX8 – the construction is designed for continuous submersion within the stated parameters.

Technical data

• Model: FSP11001DW-3

• Type: automatic submersible pump for clean water

• Rated power: 1100 W

• Supply voltage: 230 V AC

• Frequency: 50 Hz

• Maximum flow rate: approximately 6500 l/h

• Maximum head: approximately 45 m

• Maximum pressure: 4.5 bar

• Automatic start pressure: approximately 1.5 bar

• Maximum immersion depth: approximately 12 m

• Minimum immersion depth required for operation: approximately 10 cm

• Residual water level: approximately 15 mm

• Maximum particle size: 2 mm

• Maximum pumped water temperature: approximately 35°C

• Power cable length: approximately 15 m

• Mounting rope length: approximately 20 m

• Minimum well or shaft dimension: 200 × 200 mm

• Protection rating: IPX8

• Protection class: I

Package contents

• automatic submersible pump,

• mounting rope of approximately 20 m,

• stepped hose tail 1" and 3/4",

• adapter for standard garden quick-connect fittings,

• user manual.

The discharge hose is not included in the set.

Automatic operation of the water installation

After connecting the power supply the pump performs a water detection procedure. During normal operation it starts automatically when drawing begins and the pressure in the pipe falls below approximately 1.5 bar. After the draw is finished the unit switches off automatically.

This solution works well with a sprinkler, garden spray gun, tap or other water outlet. The built-in non-return valve helps maintain pressure in the pipe between operating cycles.

For wells, tanks and irrigation systems

The pump is intended for extracting water from wells, shafts and other water tanks. It can be used for pumping rainwater and mains water, supplying irrigation devices and providing water to households, gardens and allotments.

The unit must be lowered using the supplied rope, never by the power cable. To reduce sediment intake, the pump should be placed at least approximately 30 cm above the bottom of the well or tank.

The pump is intended for water up to approximately 35°C. It is not intended for drinking water, saline or muddy water, corrosive liquids, flammable liquids, oils or food products. The product is also not intended for prolonged continuous operation.