{"product_id":"microprocessor-battery-charger-6v-12v","title":"Microprocessor Battery Charger 6V\/12V","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eMICROPROCESSOR BATTERY CHARGER 6V 12V TECHNICAL DATA 7.4V 14.5V 200Ah 15A 50°C - Built-in fan controlled by MCU INTELLIGENT OPERATING MODES This means the battery is charged continuously while being monitored for voltage drops and automatically recharged with variable current. 8-STEP CHARGING Analyzes the battery, its charge status, and the correctness of connections between the battery and charger. Charges with decreasing current and constant voltage until reaching 100% capacity. if the charge level does not drop after stopping charging, the process is complete. Monitors battery voltage and maintains optimal charge at 95-100% capacity through charging current pulses. MCU (MICROPROCESSOR) CONTROL Charging resumes automatically after correct connection. Charging resumes after correct connection. SET INCLUDES - Charger - Original box - User manual\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: BLACK\u003c\/li\u003e\n\u003cli\u003eModel: 13507\u003c\/li\u003e\n\u003cli\u003eRated voltage: 230V \/ 50 Hz\u003c\/li\u003e\n\u003cli\u003eSupported battery voltages: 6V \/ 12V (pulse dynamic)\u003c\/li\u003e\n\u003cli\u003eVoltage identification for 6V: 2V\u003c\/li\u003e\n\u003cli\u003eVoltage identification for 12V: 8V\u003c\/li\u003e\n\u003cli\u003eBattery capacity 6V\/12V: 6Ah\u003c\/li\u003e\n\u003cli\u003eCharging current: 0A\u003c\/li\u003e\n\u003cli\u003eCharging process: 8-step (intelligent)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -30°C\u003c\/li\u003e\n\u003cli\u003eEfficiency: 98%\u003c\/li\u003e\n\u003cli\u003eSupports batteries: VRLA, WET, GEL, EFB, AGM\u003c\/li\u003e\n\u003cli\u003eNet weight: 0.87kg\u003c\/li\u003e\n\u003cli\u003ePower cord length: 136cm\u003c\/li\u003e\n\u003cli\u003e\"+\" and \"-\" cable length: 120cm\u003c\/li\u003e\n\u003cli\u003eDimensions: 13.5cm x 17.5cm x 7.5cm\u003c\/li\u003e\n\u003cli\u003eAdvantages of microprocessor control:\u003c\/li\u003e\n\u003cli\u003eConstant Voltage: Charges the battery using constant voltage while monitoring the charging current to prevent it from being too high, reducing it as needed during the process.\u003c\/li\u003e\n\u003cli\u003eConstant Current: When the battery voltage is lower than the charger’s set voltage, the charger maintains a constant charging current to the battery.\u003c\/li\u003e\n\u003cli\u003eTrickle Charge Modulation: When the battery voltage nears the rated voltage and the charging current is low, the charger switches to floating charge modulation mode.\u003c\/li\u003e\n\u003cli\u003eFloating Charge Modulation: Maintains the battery in a fully charged state.\u003c\/li\u003e\n\u003cli\u003eSTEP 1: DIAGNOSTICS\u003c\/li\u003e\n\u003cli\u003eSTEP 2: DESULFATION\u003c\/li\u003e\n\u003cli\u003eDetects a sulfated battery and charges it with pulsed current at low voltage and high current to remove sulfate from battery plates, restoring its initial capacity.\u003c\/li\u003e\n\u003cli\u003eSTEP 3: ANALYSIS\u003c\/li\u003e\n\u003cli\u003eChecks if the battery is damaged and able to accept charging current, preventing charging of a damaged battery.\u003c\/li\u003e\n\u003cli\u003eSTEP 4: SOFT START\u003c\/li\u003e\n\u003cli\u003eIf the battery is not damaged, charging begins with a low current (about 15%), gradually increasing.\u003c\/li\u003e\n\u003cli\u003eSTEP 5: MAIN CHARGING\u003c\/li\u003e\n\u003cli\u003eCharges with maximum current at a constant intensity, automatically adjusted based on battery charge status, until reaching 80% capacity.\u003c\/li\u003e\n\u003cli\u003eSTEP 6: FINAL CHARGING\u003c\/li\u003e\n\u003cli\u003eSTEP 7: ANALYSIS\u003c\/li\u003e\n\u003cli\u003eConducts a 2-minute battery charge test\u003c\/li\u003e\n\u003cli\u003eSTEP 8: PULSING\u003c\/li\u003e\n\u003cli\u003eOvervoltage protection: Activates if the charging voltage differs from the detected parameter.\u003c\/li\u003e\n\u003cli\u003eBattery diagnostics function: Continuously monitors battery status.\u003c\/li\u003e\n\u003cli\u003eOverheating protection: Charging stops if the charger temperature exceeds 150°C. Charging resumes when temperature drops to 80°C or after the charger is turned off for about 10 minutes.\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection: Automatically stops operation if a short circuit occurs, indicated by a long sound signal.\u003c\/li\u003e\n\u003cli\u003eReverse-connecting protection: Alerts with intermittent long sound signals if clamps are connected incorrectly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNotes\u003c\/h3\u003e\u003cp\u003eSafety features:\u003c\/p\u003e","brand":"Blacktools","offers":[{"title":"Default Title","offer_id":56415184257356,"sku":"13507","price":33.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0983\/1684\/5388\/files\/a63f29bb626ef8796e1b5c00add4ba82.jpg?v=1767498580","url":"https:\/\/ostuklikk.ee\/en\/products\/microprocessor-battery-charger-6v-12v","provider":"OstuklikkB2B\/B2C","version":"1.0","type":"link"}